Reagen PCR ZYBIO
Reagen PCR ZYBIO dapat digunakan untuk isolasi asam nukleat dari beberapa sampel. Prefile dan siap digunakan yang dapat dengan mudah dimuat ke dalam penganalisis untuk memberikan keamanan dan kemudahan pengguna akhir kami
Tersedia dengan harga terbaik hanya di Pusatgrosiralkes.com. Lihat lebih lengkap Spesifikasinya dibawah ini :
17
People watching this product now!
Description
Jual Reagen PCR ZYBIO – Viral Nucleic Acid Kit (Magnetic Beads Method)
DNA / RNA berkualitas tinggi diterapkan pada PCR, DNA Kloning NGS, dll.
Viral Nuclead Acid KIT
Reagen kami dapat digunakan untuk isolasi asam nukleat dari beberapa sampel. Prefile dan siap digunakan yang dapat dengan mudah dimuat ke dalam penganalisis untuk memberikan keamanan dan kemudahan pengguna akhir kami
Pengoperasian yang mudah, ekstraksi cepat
Hanya satu langkah pencucian semi-otomatis, 9 menit untuk menghasilkan Ekstrak setelah mendapatkan DNA dan RNA sementara itu, memenuhi kebutuhan untuk deteksi beberapa indeks
Reagen PCR ZYBIO cocok untuk situasi yang berbeda
Operasi manual
- Hingga 16 sampel untuk per pengujian;
- Waktu ekstraksi: 10-15 menit;
- Fleksibel; cocok untuk sampel kecil;
- Hanya satu langkah pencucian
Pengoperasian ekstraksi asam nukelat semi-otomatis
- Hingga 32 sampel untuk per pengujian;
- Waktu ekstraksi: 9 menit;
- Cocok untuk kebanyakan asam nukleat utama
- Ekstraktor;
- Sudah diisi sebelumnya dan siap digunakan;
Pengoperasian Otomatis
- Ekstraktor Asam Nukleat
- 1-96 sampel untuk per tes;
- Waktu ekstraksi: 15-60 menit;
- Risiko kontaminasi silang rendah;
- Sistem walkaway otomatis;
DAPATKAN PENAWARAN TERBAIK DARI KAMI :
- JAMINAN KETERSEDIAAN STOK BARANG
- JAMINAN KETERSEDIAAN REAGENSIA KIMIA KLINIK
- JAMINAN SERVICE DAN MAINTENANCE
- JAMINAN HARGA YANG BERSAING
Pusatgrosiralkes.com Jual Reagen PCR Zybio dengan Harga Termurah dan Pelayanan Terbaik, lihat juga produk sejenis lainnya.
[block id=”footer-product”]
Reviews (0)
Shipping & Delivery
Related products
Mindray BC-6800
In stock
SKU:
PGA-MIDNRAYBC6800
| Parameter | 36 reportable parameters (whole blood): WBC, Lym%, Mon%, Neu%, Bas%, Eos%, IMG%, Lym#, Mon#, Neu#, Eos#, Bas#, IMG#; RBC, HGB, HCT, MCV, MCH, MCHC, RDW-CV, RDW-SD, RET%, RET#, IRF, LFR, MFR, HFR, NRBC#, NRBC%; PLT, MPV, PDW, PCT, P-LCR, P-LCC, IPF 18 research parameters (whole blood): HFC#, HFC%, WBC-R, WBC-D, WBC-B, WBC-N, RBC-O, PLT-O, PLT-I, PDW-SD, InR#, InR‰, Micro%, Micro#, Macro%, Macro#, MRV, RHE 7 reportable parameters (body fluid): WBC-BF, TC-BF#, MN#, MN%, PMN#, PMN%, RBC-BF 7 research parameters (body fluid): Eos-BF#, Eos-BF%, Neu-BF#, Neu-BF%, HF-BF#, HF-BF%, RBC-BF 2 histograms for RBC and PLT 3 scattergrams (3D) for DIFF, NRBC and RET 6 scattergrams (2D) for DIFF, BASO, NRBC, RET, RET-EXT, PLT-O |
|---|---|
| Prinsip | SF Cube cell analysis technology for WBC, 5-Part diff, NRBC, RET and PLT-O Focusing Flow-DC method for RBC and PLT Cyanide free hemoglobin measurement |
| Kinerja | Parameter Linearity Range Precision Carryover WBC 0-500×10⁹/L ≤2.5% (≥4×10⁹/L) ≤1.0％ RBC 0-8×10¹²/L ≤1.5% (≥3.5×10¹²/L) ≤1.0％ HGB 0-250g/L ≤1.0% (110-180g/L) ≤1.0％ HCT 0-75% ≤1.5% (30%-50%) ≤1.0％ PLT 0-5000×10⁹/L ≤4.0% (≥100×10⁹/L) ≤1.0％ RET# 0-0.8×10¹²/L ≤15% (RBC≥3×10¹²/L; / 1%≤RET%≤4%) |
| Sample Volume | Predilute mode (capillary blood), Open vial 40μL Manual mode (whole blood), Open vial 150μL Autoloader mode (whole blood), Closed vial 200μL Manual mode (body fluid), Open vial 150μL |
| Throughput | Up to 125 samples per hour (CBC+DIFF) Up to 90 samples per hour (CBC+DIFF+RET) Up to 40 samples per hour (body fluid) |
| Loading capacity | Up to 100 sample tubes |
| Mode | CBC, CBC+DIFF, CBC+RET, CBC+NRBC, CBC+DIFF+RET, CBC+DIFF+NRBC, CBC+DIFF+RET+NRBC, RET |
| Data storage capacity | Up to 100,000 patient results including all numeric and graphical information |
| Printout | Various printout formats and user-defined formats available |
| Operating environment | Temperature: 15ºC~32ºC Humidity: 30%~85% |
OPTI CCA-TS Blood Gas
In stock
SKU:
PGA-OPTICCA
| Sample Volume | 125 µL (60µL for B60 cassette) |
|---|---|
| Calibration Time | <90 seconds |
| Measurement | <120 seconds |
| Typical Cycle Time | <210 seconds |
| Operating Temperature | 10–32°C (50–90°F) |
| Sample Type | Whole blood, serum or plasma |
| Measurement Principle | Optical fluorescence, reflectance |
| Sample Application | Syringe, capillary or ComfortSampler® |
| Data Storage | 200 patient records 70 QC samples per level 105 SRC samples per level 300 user IDs and passwords |
| Security | Password : Password-protected analyzer setup and delete functions QC Lockout : User-definable QC lockout functions |
| Dimensions/Weight | Height x Width x Depth : 124 x 362 x 230 mm (4.7 x 14.2 x 9.1 in) Weight : 5.5 kg (12 lb) with rechargeable battery pack |
| Miscellaneous | Voltage/Frequency : 120 or 240 AC, 50–60 Hz Power Consumption (max.) : 110 VA Interface : Serial, Ethernet* (*TS only) Approvals : CE, UL and IVDD |
Rayto RT-2100C Elisa Reader
In stock
SKU:
PGA-RAYTO2100C
| Size | 460mm（L）×330mm（W）×190mm（H） |
|---|---|
| Weight | 7,5 kg |
| Power | a.c.110V～220V，50/60Hz |
| Fuses | T315AL250V |
| Work Environment: temperature 0℃-40℃ | Humidity ≤ 85% |
| Store Environment: -10℃～40℃ | Humidity ≤ 85% |
| Lamp | OSRAM64255，6V/20W， |
| Standard Wavelength: | 405，450，492，630nm，(substitute filters from 400-700nm available on special order) |
| Abs range | 0-3.500A |
| Measurement range | 0-2.000A |
| Accuracy | 0-2.0A：±1.0%or±0.007A |
| Precision | 0-2.0A：±0.5%or±0.005A |
| Linearity | ±2.0% or±0.007A |
| Reading speed | Continuous mode ＜5s，step by step mode＜15s |
| Warm up time | 1 minutes |
| CPU | Embedded RISC cpu |
| Store content | 100 program，1000 patient information，10000 test data |
| Interface | RS-232C serial interface, USB interface，RJ45 interface, SD interface |
| Display | 5.7″LCD display（320×240 discernibility,256 gray scale） |
| Input | Touch panel and pen, external mouse（special order） |
Selectra Pro XL
In stock
SKU:
PGA-SELECTRAPRO-XL
| Throughput | Up to 450 photometric and electrolyte tests/hour. |
|---|---|
| Reagent System | 64 refrigerated reagent positions for 10 mL, 25 mL and 50 mL reagent bottles Cooled to 10°C +/- 4°C at normal laboratory conditions All reagent positions can be assigned as R1, R2 and R3. |
| Sample System | 80 barcode readable positions All positions fit 13×75 or 16x 100mm primary and secondary tubes and pediatric cups All positions can be used for calibrators, controls, normal, pediatric and STAT samples |
| Pipetting System | 1000 µL reagent syringe: R1 volume 110-400 µL R2 volume 0-180 µL R3 volume 0-180 µL Programmable in 1 µL steps 100 µL sample syringe: Sample volume 1-30 µL Programmable in 0.1 µL steps Pre programmed ratio selectable from ratios 1:2 up to 1:100 with 3 diluents Pre-heated probe with level detection, collision protection and integrated mixer. |
| Cuvette Rotor | Cost effective, semi-disposable cuvette rotor with 48 cuvettes Up to 10.000 tests per rotor Typical reagent consumption 220 µL per test Measurement temperature 37°C, controlled by Peltier elements. |
| Light Source | Quartz-iodine lamp 12V-20W |
| Wavelength Range | Optical unit with 8 position filter wheel 340, 405, 505, 546, 578, 620, 660, 700 nm standard wavelengths Other wavelengths available on request. |
| Photometric Range | -0.1 to 3.0 Absorbance Resolution 0.001 Abs. |
| Analytical Modes (Single, Dual and Triple reagent system) | Kinetic measurement with linearity check Mono- and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction Two point measurement; with or without slope blank Graphic plot of all measuring points Predilution and automatic reflex dilution as needed Range of calibration models Non-linear calibration curves Prozone check for immunology tests Cut-off declaration Calculated tests. |
| Quality Control | Up to 15 controls can be defined, 3 per test Westgard or Basic QC rules Levey-Jennings plots Quality control statistics. |
| Standards and Regulations | CE -IVD CB UL. |
| Dimensions | 117 x 115 x 80 cm (W x H x D) 46.1 x 45.3 x 31.5 in(W x H x D) |
| Weight | 190 kg (419 lbs). |
| Interface | Host-Query interface available Host: RS 232 or Ethernet (TCP/IP) through LIS-2A protocol. |
| Environmental Conditions | Temperature: 15 – 32 °C (59 – 90 °F) Humidity: 15 – 88% RH Altitude: up to 2000 m Plumbing: No dedicated water or drain required Electrical: Voltage: 100 – 240 Vac Frequency: 50 – 60 Hz Power (max): 380 VA . |
| Integrated PC | Touch screen navigation Operating system: Windows™ XP |
| Barcode Reader | Hand held CCD barcode reader used for reagent identification |
| Eco Kit | Enables separate collection of concentrated measurement mixture and dilute (wash) waste |
| Dry ISE Module | Patented Solid State Electrode Technology Indirect measurement Dilution 1:14 Measures Sodium, Potassium, Chloride and CO2. |
| Positive Sample Identification | Positive Sample Identification (PSID) reads all popular barcodes. |
| Printer | Printer supported by MS Windows™. |
| ProActive Maintenance Kit | Complete parts kit for annual preventive maintenance. |
Selectra Pro XS
In stock
SKU:
PGA-SELECTRAPRO-XS
| Throughput | Up to 75 tests per hour. |
|---|---|
| Reagent System | Inner rotor ring: 15 reagent positions for 10 ml, 25 ml and 50 ml reagent bottles Optionally cooled to 10°C +/ 4°C at normal laboratory conditions. Outer rotor ring: 25 positions for (STAT) samples, controls and calibrators 15 positions for reagent bottles All positions fit 13×75 mm primary and secondary tubes and pediatric cups All positions can be used for calibrators, controls, normal, pediatric and STAT samples. |
| Pipetting System | 100 μl reagent syringe: – R1 volume 110-400 μl – R2 volume 0-180 μl -R3 volume 0-180 μl – Programmable in 1 μl steps 100 μl sample syringe: – Sample volume 1-30 μl – Programmable in 0.1 μl steps – Programmable dilution ratios 1:5 up to 1:100 in one step increments with 3 possible diluents Pre-heated probe with level detection, collision protection and integrated mixer. |
| Cuvette Rotor | Disposable cuvette rotor with 48 cuvettes Minimum measurement volume 220 μl Measurement temperature 37°C, controlled by Peltier elements. |
| Light Source | Quartz-iodine lamp 12V-20W. Wavelength Range Optical unit with 8 position filter wheel Automatic wavelength selection 340, 405, 505, 546, 578, 620, 660 nm standard installed One free position Other wavelenghts available on request. |
| Photometric Range | -0.1 to 3.0 Absorbance Resolution 0.001 Abs. |
| Analytical Modes (Single, Dual and Triple reagent system) | Kinetic measurement with linearity check Mono and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction Two point measurement; with or without slope blank Graphic plot of all measuring points Automatic rerun with sample reduction Non-linear calibration curves Prozone check for immunology tests Cut-off declaration Calculated tests. |
| Quality Control | Up to 15 different controls can be defined, 3 per test Westgard rules Levey-Jennings plots Quality control statistics. |
| Standards and Regulations | CE -IVD CB. |
| Dimensions | 89 x 58 x 60 cm (W x H x D) No peripherals |
| Weight | 67 kg. |
| Interface | State of the art Host-Query interface available Host: RS 232 or Ethernet (TCP/IP) through LIS-2A protocol. |
| Environmental Conditions | Temperature: 15 – 32 °C Humidity: 15 – 85% RH Altitude: up to 2,000 m Plumbing: No dedicated water or drain required Electrical: – Voltage: 100 – 240 Vac – Frequency: 50 – 60 Hz – Power (max): 350 VA . |
| Barcode Reader | Hand held CCD bar code reader used for test requisition, reagent identification and automated programing of assays, controls, and calibrators. |
| Printer | Printer supported by MS Windows™ |
| ProActive Maintenance Kit | Complete parts kit for annual preventive maintenance. |
WP-330
In stock
SKU:
PGA-WP330
| Parameter | WBC, RBC, HGB, MCV, MCH, MCHC, HCT, PLT, NEUT#, MXD#. LYM#, NEUT%, MXD%, LYM%, RDW-CV, RDW-SD, PDW, MPV, PCT, P-LCR, PLCC |
|---|---|
| Histogram | WBC, RBC, PLT |
| Principles | WBC, RBC, PLT: electrical resistance for counting Sa |
| Sample Volume | Pre Dil : 20 ul Whole Blood : 9,8 ul |
| Throughput | 30 samples/ hour |
| Display | 8 inch color lcd with mouse operation |
| Alarms | Error Message |
| Input/Output | RS232, USB Lan Keyboard Mouse |
| Print Out | Thermal Recorder, 55mm width paper, Various printout format, external printer optional |
| Operating Environment | Temperature 15⁰C-35⁰C, Relative humidity ≤80% |
| Reagent | Detergent, Diluent, BCC-3600 Lyse |
| Power Requirement | a.c 100-240 VAC 50/60 HZ |
| Dimension (mm) | 468 (L) x 325 (W) x 395 (H) |
| Weight | 16.5 Kg |
Reviews
Clear filtersThere are no reviews yet.