Rapid Test Covid Zybio
Jual Rapid Test Covid Zybio – SARS-CoV-2 IgG/IgM Antibody Test Kit.
Tersedia dengan harga terbaik hanya di Pusatgrosiralkes.com. Lihat lebih lengkap Spesifikasinya dibawah ini :
Jual Rapid Test Covid Zybio – SARS-CoV-2 IgG/IgM Antibody Test Kit.
Mudah digunakan, hasil instan dalam 10-20 menit
Cepat, Akurat, dan Mudah

Jenis Sampel : Darah utuh, serum, plasma
Isi : 25 Test/Kit
Buffer : 1 (Botol)
Rapid test yang banyak beredar saat ini adalah metode untuk mendeteksi antibodi, yaitu IgM dan IgG, yang diproduksi oleh tubuh untuk melawan virus Corona. Antibodi ini akan dibentuk oleh tubuh bila ada paparan virus Corona.
Dengan kata lain, bila antibodi ini terdeteksi di dalam tubuh seseorang, artinya tubuh orang tersebut pernah terpapar atau dimasuki oleh virus Corona. Namun, perlu Anda ketahui, pembentukan antibodi ini memerlukan waktu, bahkan bisa sampai beberapa minggu.
Sumber : https://www.alodokter.com/kenali-apa-itu-rapid-test-untuk-virus-corona
- JAMINAN KETERSEDIAAN STOK BARANG
- JAMINAN KETERSEDIAAN REAGENSIA KIMIA KLINIK
- JAMINAN SERVICE DAN MAINTENANCE
- JAMINAN HARGA YANG BERSAING
Pusatgrosiralkes.com Jual Rapid Test Covid Zybio dengan Harga Termurah dan Pelayanan Terbaik, lihat juga produk sejenis lainnya.
[block id=”footer-product”]
Related products
BS 3000M SINNOWA
In stock
| Methods | End point, Two points, Multi standard, Kinetic, Bichromatic and Serum blank, ect. |
|---|---|
| Test Program | 200 items, which may be modified and deleted |
| Capacity of Flow Cell | 32ul |
| Temperature Control | 25 ℃, 30 ℃, 37±0.1, room temperature. |
| Optical System: | Interferential filters, 340 / 405 / 492 / 510 / 546 / 578 / 620nm and two more filters available. |
| Light Source | 6V 10W halogen lamp. |
| Photometric Range | 0-2.5A |
| Display | LCD screen |
| Printer: | Built-in thermal printer |
| Serial Output | RS-232 standard |
| Dimension | 39cm×37cm×18cm |
ESR Analyzer Caretium XC-A30
In stock
| Prinsip pengukuran | Pemblokiran garis luar |
|---|---|
| Akurasi pengukuran | <0.2mm |
| Residual Volume | <1 µL |
| Pada saat yang sama dapat mengukur jumlah sampel | 30 |
| Waktu pengukuran | 30min / 60min opsional |
| Volume sampel | 1,6 ml darah utuh antikoagulan |
| Kondisi kerja | Suhu 15 ° C ~ 32oC, suhu relatif: 45% ~ 85% |
| Sumber Daya | AC 220V ± 10% 50Hz |
| Antarmuka Data | RS-232 |
| Volume | 400mm × 300mm × 180mm |
| Berat | 10 kg |
Mindray BC-5300
In stock
| Parameter | 27: WBC, Lym%, Mon%, Neu%, Eos%, Bas%, Lym #, Mon #, Neu #, Eos #, Bas #, RBC, HGB, HCT, MCV, MCH, MCHC, RDW-CV, RDW-SD, PLT, MPV, PDW, PCT, LIC%, LIC #, ALY%, ALY # 3 histogram dan 1 scattergram |
|---|---|
| Prinsip | Flow Cytometry (FCM), penghamburan Laser Semi-konduktor, pewarna kimia Metode, saluran Basophil independen Metode impedansi untuk perhitungan WBC, RBC, PLT Reagen bebas sianida untuk tes Hemoglobin |
| Kinerja | Carryover Precision Linearity WBC ≤ 0,5% ≤ 2,0% (4-15 x 10⁹ / L) 0,00-99,99 x10⁹ / L RBC ≤ 0,5% ≤ 1,5% (3,5-6,0 x 10¹² / L) 0,00-8,00 x10¹² / L HGB ≤ 0,5% ≤ 1,5% (110-180g / L) 0-250g / L PLT ≤ 1.0% ≤ 4.0% (150-500 x 10⁹ / L) 0-1000 x10⁹ / L |
| Sample Volume | Darah Utuh: 20 μL Prediluted: 20 μL |
| Throughput | 60 sampel per jam |
| Mode Tes | CBC CBC + DIFF |
| Kapasitas Penyimpanan Data | Hingga 40.000 hasil termasuk informasi numerik dan grafis |
| Komunikasi | Port LAN mendukung protokol HL7 |
| Lingkungan Operasi | Suhu: 15 ° C ~ 30 ° C Kelembaban: 30 ~ 85% Tekanan Udara: 70 ~ 106 kPa |
| Kebutuhan Daya | A.C 100-240V ≤ 300VA 50 / 60Hz |
| Dimensi dan Berat | 410mm (L) x 470mm (W) x 530mm (H) Berat: ≤45 Kg |
Mindray BC-5500
In stock
| Parameter | 27: WBC, Lym%, Mon%, Neu%, Eos%, Bas%, Lym #, Mon #, Neu #, Eos #, Bas #, RBC, HGB, HCT, MCV, MCH, MCHC, RDW-CV, RDW-SD, PLT, MPV, PDW, PCT, LIC%, LIC #, ALY%, ALY # 2 histogram dan 2 scattergram |
|---|---|
| Prinsip | Metode, saluran Basophil independen Metode impedansi untuk perhitungan WBC, RBC, PLT Reagen bebas sianida untuk tes Hemoglobin |
| Kinerja | Parameter : Linearity Range WBC (10 /L) : 1.00-99.99 RBC (10 /L) : 0.30-8.20 HGB (g/L) : 1-260 PLT (10 /L) : 10-100 |
| Sample Volume | Prediluted : 40uL Manual Mode (Open Sampling) : 12uL Auto Loader / Manual Mode ( Closed tube) : 180uL |
| Throughput | 80 sampel per jam |
| Display | 10.4 inch TFT Touch Screen Resolution 800×600 |
| Menu | Count, Review, QC, Setup , Service, Calibration, Logout, Shutdown |
| Carry Over | WBC, RBC, HGB, PLT<1.0% |
| Interface | USB, LAN Support bidirection and unidirection communication models |
| Printout | External Laser Printer / Inkjet printer, various printout formats |
| Operating Environment | Temperature 15C ~ 30c Humidity 30%-85% |
| Kebutuhan Daya | Main Unit : 100-240V ~50/60Hz Compressor : 110/115V ~50/60Hz, 220/230V ~50/60Hz |
| Dimension and Weight | Main Unit : 664x613x585 (LxWxH)(mm) Compressor : 305x475x425 (LxWxH)(mm) Sample loader (optional) : 516x237x90 (LxWxH)(mm) |
Selectra Pro M
In stock
| Kecepatan | Sampai dengan 266 tes per jam Sampai dengan 180 tes per jam pada mode MONO |
|---|---|
| Sumber Cahaya | Lampu Quartz-iodine 12V-20W |
| Fotometrik | Absorbansi – 0.1 hingga 3.0; Resolusi 0,001 Abs. |
| Konsumsi Air | Maksimal ~500 ml per jam, dengan operasi terus menerus |
| Standard dan Regulasi | ce-ivD cb |
| Dimensi | 122 x 75 x 61 cm (P x T x L) |
| Berat | 95kg |
| Antarmuka | Host: RS232 atau Etherhet (TCP/IP) melalui protokol LIS-2A. |
Selectra Pro XL
In stock
| Throughput | Up to 450 photometric and electrolyte tests/hour. |
|---|---|
| Reagent System | 64 refrigerated reagent positions for 10 mL, 25 mL and 50 mL reagent bottles Cooled to 10°C +/- 4°C at normal laboratory conditions All reagent positions can be assigned as R1, R2 and R3. |
| Sample System | 80 barcode readable positions All positions fit 13×75 or 16x 100mm primary and secondary tubes and pediatric cups All positions can be used for calibrators, controls, normal, pediatric and STAT samples |
| Pipetting System | 1000 µL reagent syringe: R1 volume 110-400 µL R2 volume 0-180 µL R3 volume 0-180 µL Programmable in 1 µL steps 100 µL sample syringe: Sample volume 1-30 µL Programmable in 0.1 µL steps Pre programmed ratio selectable from ratios 1:2 up to 1:100 with 3 diluents Pre-heated probe with level detection, collision protection and integrated mixer. |
| Cuvette Rotor | Cost effective, semi-disposable cuvette rotor with 48 cuvettes Up to 10.000 tests per rotor Typical reagent consumption 220 µL per test Measurement temperature 37°C, controlled by Peltier elements. |
| Light Source | Quartz-iodine lamp 12V-20W |
| Wavelength Range | Optical unit with 8 position filter wheel 340, 405, 505, 546, 578, 620, 660, 700 nm standard wavelengths Other wavelengths available on request. |
| Photometric Range | -0.1 to 3.0 Absorbance Resolution 0.001 Abs. |
| Analytical Modes (Single, Dual and Triple reagent system) | Kinetic measurement with linearity check Mono- and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction Two point measurement; with or without slope blank Graphic plot of all measuring points Predilution and automatic reflex dilution as needed Range of calibration models Non-linear calibration curves Prozone check for immunology tests Cut-off declaration Calculated tests. |
| Quality Control | Up to 15 controls can be defined, 3 per test Westgard or Basic QC rules Levey-Jennings plots Quality control statistics. |
| Standards and Regulations | CE -IVD CB UL. |
| Dimensions | 117 x 115 x 80 cm (W x H x D) 46.1 x 45.3 x 31.5 in(W x H x D) |
| Weight | 190 kg (419 lbs). |
| Interface | Host-Query interface available Host: RS 232 or Ethernet (TCP/IP) through LIS-2A protocol. |
| Environmental Conditions | Temperature: 15 – 32 °C (59 – 90 °F) Humidity: 15 – 88% RH Altitude: up to 2000 m Plumbing: No dedicated water or drain required Electrical: Voltage: 100 – 240 Vac Frequency: 50 – 60 Hz Power (max): 380 VA . |
| Integrated PC | Touch screen navigation Operating system: Windows™ XP |
| Barcode Reader | Hand held CCD barcode reader used for reagent identification |
| Eco Kit | Enables separate collection of concentrated measurement mixture and dilute (wash) waste |
| Dry ISE Module | Patented Solid State Electrode Technology Indirect measurement Dilution 1:14 Measures Sodium, Potassium, Chloride and CO2. |
| Positive Sample Identification | Positive Sample Identification (PSID) reads all popular barcodes. |
| Printer | Printer supported by MS Windows™. |
| ProActive Maintenance Kit | Complete parts kit for annual preventive maintenance. |
Selectra Pro XS
In stock
| Throughput | Up to 75 tests per hour. |
|---|---|
| Reagent System | Inner rotor ring: 15 reagent positions for 10 ml, 25 ml and 50 ml reagent bottles Optionally cooled to 10°C +/ 4°C at normal laboratory conditions. Outer rotor ring: 25 positions for (STAT) samples, controls and calibrators 15 positions for reagent bottles All positions fit 13×75 mm primary and secondary tubes and pediatric cups All positions can be used for calibrators, controls, normal, pediatric and STAT samples. |
| Pipetting System | 100 μl reagent syringe: – R1 volume 110-400 μl – R2 volume 0-180 μl -R3 volume 0-180 μl – Programmable in 1 μl steps 100 μl sample syringe: – Sample volume 1-30 μl – Programmable in 0.1 μl steps – Programmable dilution ratios 1:5 up to 1:100 in one step increments with 3 possible diluents Pre-heated probe with level detection, collision protection and integrated mixer. |
| Cuvette Rotor | Disposable cuvette rotor with 48 cuvettes Minimum measurement volume 220 μl Measurement temperature 37°C, controlled by Peltier elements. |
| Light Source | Quartz-iodine lamp 12V-20W. Wavelength Range Optical unit with 8 position filter wheel Automatic wavelength selection 340, 405, 505, 546, 578, 620, 660 nm standard installed One free position Other wavelenghts available on request. |
| Photometric Range | -0.1 to 3.0 Absorbance Resolution 0.001 Abs. |
| Analytical Modes (Single, Dual and Triple reagent system) | Kinetic measurement with linearity check Mono and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction Two point measurement; with or without slope blank Graphic plot of all measuring points Automatic rerun with sample reduction Non-linear calibration curves Prozone check for immunology tests Cut-off declaration Calculated tests. |
| Quality Control | Up to 15 different controls can be defined, 3 per test Westgard rules Levey-Jennings plots Quality control statistics. |
| Standards and Regulations | CE -IVD CB. |
| Dimensions | 89 x 58 x 60 cm (W x H x D) No peripherals |
| Weight | 67 kg. |
| Interface | State of the art Host-Query interface available Host: RS 232 or Ethernet (TCP/IP) through LIS-2A protocol. |
| Environmental Conditions | Temperature: 15 – 32 °C Humidity: 15 – 85% RH Altitude: up to 2,000 m Plumbing: No dedicated water or drain required Electrical: – Voltage: 100 – 240 Vac – Frequency: 50 – 60 Hz – Power (max): 350 VA . |
| Barcode Reader | Hand held CCD bar code reader used for test requisition, reagent identification and automated programing of assays, controls, and calibrators. |
| Printer | Printer supported by MS Windows™ |
| ProActive Maintenance Kit | Complete parts kit for annual preventive maintenance. |

Reviews
Clear filtersThere are no reviews yet.